$f$ analytic and $|f|leq1$ on a strip.
$begingroup$
Let $E$ be the strip ${zinmathbb{C}:0<Re z <1}$. Let $f$ be analytic on $E$ and continuous on $bar{E}$. Show that if $f$ is bounded on $E$ and $|f|leq1$ on the boundary of $E$, then $|f|leq1$ on $E$.
The hint that comes with the problem says to consider the analytic function $f_{epsilon}(z)=(1+epsilon z)^{-1}f(z)$ on open set ${zinmathbb{C}:0<Re z<1, -M<Im z<M}$ for $M$ large.
From some searching, it looks like I need to use Möbius transformation but I'm not sure how to integrate that in this case. Any input is appreciated.
complex-analysis maximum-principle
edited Dec 21 '18 at 14:36
Song
15.7k1738
asked Dec 20 '18 at 17:32
Ya GYa G
529211
$endgroup$
add a comment |
$begingroup$
Let $E$ be the strip ${zinmathbb{C}:0<Re z <1}$. Let $f$ be analytic on $E$ and continuous on $bar{E}$. Show that if $f$ is bounded on $E$ and $|f|leq1$ on the boundary of $E$, then $|f|leq1$ on $E$.
The hint that comes with the problem says to consider the analytic function $f_{epsilon}(z)=(1+epsilon z)^{-1}f(z)$ on open set ${zinmathbb{C}:0<Re z<1, -M<Im z<M}$ for $M$ large.
From some searching, it looks like I need to use Möbius transformation but I'm not sure how to integrate that in this case. Any input is appreciated.
complex-analysis maximum-principle
edited Dec 21 '18 at 14:36
Song
15.7k1738
asked Dec 20 '18 at 17:32
Ya GYa G
529211
$endgroup$
$begingroup$
Another way one might approach this problem is by using a mobius transformation to map the right half plane to the unit disk then apply maximum modulus principle. The map should be begin{equation} frac{z+1}{z-1} end{equation} I would attempt this because we can apply the maximum modulus principle on the unit disk, so I want to transform his onto a problem on the unit disk.
$endgroup$
– Story123
Dec 21 '18 at 18:58
$begingroup$
Actually we cannot apply Maximum modulus principle in its raw form: the reason is that $f$ cannot be continuously extended to the closure of the domain. The problem arises from the fact that $xpm iinfty$ is mapped to $1$. Unless one deals with the behavior of $f$ near $1$, maximum modulus principle does not give the result. Most likely, it only makes the problem more complicated.
$endgroup$
– Song
Dec 22 '18 at 12:36
add a comment |
$begingroup$
Let $E$ be the strip ${zinmathbb{C}:0<Re z <1}$. Let $f$ be analytic on $E$ and continuous on $bar{E}$. Show that if $f$ is bounded on $E$ and $|f|leq1$ on the boundary of $E$, then $|f|leq1$ on $E$.
The hint that comes with the problem says to consider the analytic function $f_{epsilon}(z)=(1+epsilon z)^{-1}f(z)$ on open set ${zinmathbb{C}:0<Re z<1, -M<Im z<M}$ for $M$ large.
From some searching, it looks like I need to use Möbius transformation but I'm not sure how to integrate that in this case. Any input is appreciated.
complex-analysis maximum-principle
edited Dec 21 '18 at 14:36
Song
15.7k1738
asked Dec 20 '18 at 17:32
Ya GYa G
529211
$endgroup$
Let $E$ be the strip ${zinmathbb{C}:0<Re z <1}$. Let $f$ be analytic on $E$ and continuous on $bar{E}$. Show that if $f$ is bounded on $E$ and $|f|leq1$ on the boundary of $E$, then $|f|leq1$ on $E$.
The hint that comes with the problem says to consider the analytic function $f_{epsilon}(z)=(1+epsilon z)^{-1}f(z)$ on open set ${zinmathbb{C}:0<Re z<1, -M<Im z<M}$ for $M$ large.
From some searching, it looks like I need to use Möbius transformation but I'm not sure how to integrate that in this case. Any input is appreciated.
complex-analysis maximum-principle
complex-analysis maximum-principle
edited Dec 21 '18 at 14:36
Song
15.7k1738
asked Dec 20 '18 at 17:32
Ya GYa G
529211
edited Dec 21 '18 at 14:36
Song
15.7k1738
asked Dec 20 '18 at 17:32
Ya GYa G
529211
edited Dec 21 '18 at 14:36
Song
15.7k1738
edited Dec 21 '18 at 14:36
Song
15.7k1738
edited Dec 21 '18 at 14:36
Song
15.7k1738
15.7k1738
asked Dec 20 '18 at 17:32
Ya GYa G
529211
asked Dec 20 '18 at 17:32
Ya GYa G
529211
asked Dec 20 '18 at 17:32
Ya GYa G
529211
529211
$begingroup$
Another way one might approach this problem is by using a mobius transformation to map the right half plane to the unit disk then apply maximum modulus principle. The map should be begin{equation} frac{z+1}{z-1} end{equation} I would attempt this because we can apply the maximum modulus principle on the unit disk, so I want to transform his onto a problem on the unit disk.
$endgroup$
– Story123
Dec 21 '18 at 18:58
$begingroup$
Actually we cannot apply Maximum modulus principle in its raw form: the reason is that $f$ cannot be continuously extended to the closure of the domain. The problem arises from the fact that $xpm iinfty$ is mapped to $1$. Unless one deals with the behavior of $f$ near $1$, maximum modulus principle does not give the result. Most likely, it only makes the problem more complicated.
$endgroup$
– Song
Dec 22 '18 at 12:36
add a comment |
$begingroup$
Another way one might approach this problem is by using a mobius transformation to map the right half plane to the unit disk then apply maximum modulus principle. The map should be begin{equation} frac{z+1}{z-1} end{equation} I would attempt this because we can apply the maximum modulus principle on the unit disk, so I want to transform his onto a problem on the unit disk.
$endgroup$
– Story123
Dec 21 '18 at 18:58
$begingroup$
Actually we cannot apply Maximum modulus principle in its raw form: the reason is that $f$ cannot be continuously extended to the closure of the domain. The problem arises from the fact that $xpm iinfty$ is mapped to $1$. Unless one deals with the behavior of $f$ near $1$, maximum modulus principle does not give the result. Most likely, it only makes the problem more complicated.
$endgroup$
– Song
Dec 22 '18 at 12:36
$begingroup$
Another way one might approach this problem is by using a mobius transformation to map the right half plane to the unit disk then apply maximum modulus principle. The map should be begin{equation} frac{z+1}{z-1} end{equation} I would attempt this because we can apply the maximum modulus principle on the unit disk, so I want to transform his onto a problem on the unit disk.
$endgroup$
– Story123
Dec 21 '18 at 18:58
$begingroup$
Another way one might approach this problem is by using a mobius transformation to map the right half plane to the unit disk then apply maximum modulus principle. The map should be begin{equation} frac{z+1}{z-1} end{equation} I would attempt this because we can apply the maximum modulus principle on the unit disk, so I want to transform his onto a problem on the unit disk.
$endgroup$
– Story123
Dec 21 '18 at 18:58
$begingroup$
Actually we cannot apply Maximum modulus principle in its raw form: the reason is that $f$ cannot be continuously extended to the closure of the domain. The problem arises from the fact that $xpm iinfty$ is mapped to $1$. Unless one deals with the behavior of $f$ near $1$, maximum modulus principle does not give the result. Most likely, it only makes the problem more complicated.
$endgroup$
– Song
Dec 22 '18 at 12:36
$begingroup$
Actually we cannot apply Maximum modulus principle in its raw form: the reason is that $f$ cannot be continuously extended to the closure of the domain. The problem arises from the fact that $xpm iinfty$ is mapped to $1$. Unless one deals with the behavior of $f$ near $1$, maximum modulus principle does not give the result. Most likely, it only makes the problem more complicated.
$endgroup$
– Song
Dec 22 '18 at 12:36
add a comment |
1 Answer
1
active
oldest
votes
$begingroup$
This is the Phragmen-Lindelof principle. Note that
$$
lim_{|y|toinfty} |f_epsilon(x+iy)| = 0
$$ uniformly on $xin [0,1]$. If we apply maximum modulus principle to the region
$$
{x+iy;|;0leq xleq 1,;|y|leq M}
$$ for large $M>0$, we can see that the maximum modulus of $|f_epsilon|$ cannot occur on $y=pm M$. Thus it must occur on the sides $x=0$ or $x=1$. This gives
$$
|f_epsilon(x+iy)|leq 1,quadforall xin[0,1],;|y|leq M,
$$ for all sufficiently large $M>0$ and thus
$$
|f_epsilon(x+iy)|leq 1,quadforall xin [0,1], yin mathbb{R}.
$$ Finally take $epsilonto 0$ to get the desired bound
$$
|f(x+iy)|leq 1,quadforall xin [0,1], yin mathbb{R}.
$$
answered Dec 20 '18 at 17:47
SongSong
15.7k1738
$endgroup$
add a comment |
Your Answer
StackExchange.ifUsing("editor", function () {
return StackExchange.using("mathjaxEditing", function () {
StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix) {
StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["$", "$"], ["\\(","\\)"]]);
});
});
}, "mathjax-editing");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "69"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fmath.stackexchange.com%2fquestions%2f3047785%2ff-analytic-and-f-leq1-on-a-strip%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
$begingroup$
This is the Phragmen-Lindelof principle. Note that
$$
lim_{|y|toinfty} |f_epsilon(x+iy)| = 0
$$ uniformly on $xin [0,1]$. If we apply maximum modulus principle to the region
$$
{x+iy;|;0leq xleq 1,;|y|leq M}
$$ for large $M>0$, we can see that the maximum modulus of $|f_epsilon|$ cannot occur on $y=pm M$. Thus it must occur on the sides $x=0$ or $x=1$. This gives
$$
|f_epsilon(x+iy)|leq 1,quadforall xin[0,1],;|y|leq M,
$$ for all sufficiently large $M>0$ and thus
$$
|f_epsilon(x+iy)|leq 1,quadforall xin [0,1], yin mathbb{R}.
$$ Finally take $epsilonto 0$ to get the desired bound
$$
|f(x+iy)|leq 1,quadforall xin [0,1], yin mathbb{R}.
$$
answered Dec 20 '18 at 17:47
SongSong
15.7k1738
$endgroup$
add a comment |
$begingroup$
This is the Phragmen-Lindelof principle. Note that
$$
lim_{|y|toinfty} |f_epsilon(x+iy)| = 0
$$ uniformly on $xin [0,1]$. If we apply maximum modulus principle to the region
$$
{x+iy;|;0leq xleq 1,;|y|leq M}
$$ for large $M>0$, we can see that the maximum modulus of $|f_epsilon|$ cannot occur on $y=pm M$. Thus it must occur on the sides $x=0$ or $x=1$. This gives
$$
|f_epsilon(x+iy)|leq 1,quadforall xin[0,1],;|y|leq M,
$$ for all sufficiently large $M>0$ and thus
$$
|f_epsilon(x+iy)|leq 1,quadforall xin [0,1], yin mathbb{R}.
$$ Finally take $epsilonto 0$ to get the desired bound
$$
|f(x+iy)|leq 1,quadforall xin [0,1], yin mathbb{R}.
$$
answered Dec 20 '18 at 17:47
SongSong
15.7k1738
$endgroup$
add a comment |
$begingroup$
This is the Phragmen-Lindelof principle. Note that
$$
lim_{|y|toinfty} |f_epsilon(x+iy)| = 0
$$ uniformly on $xin [0,1]$. If we apply maximum modulus principle to the region
$$
{x+iy;|;0leq xleq 1,;|y|leq M}
$$ for large $M>0$, we can see that the maximum modulus of $|f_epsilon|$ cannot occur on $y=pm M$. Thus it must occur on the sides $x=0$ or $x=1$. This gives
$$
|f_epsilon(x+iy)|leq 1,quadforall xin[0,1],;|y|leq M,
$$ for all sufficiently large $M>0$ and thus
$$
|f_epsilon(x+iy)|leq 1,quadforall xin [0,1], yin mathbb{R}.
$$ Finally take $epsilonto 0$ to get the desired bound
$$
|f(x+iy)|leq 1,quadforall xin [0,1], yin mathbb{R}.
$$
answered Dec 20 '18 at 17:47
SongSong
15.7k1738
$endgroup$
This is the Phragmen-Lindelof principle. Note that
$$
lim_{|y|toinfty} |f_epsilon(x+iy)| = 0
$$ uniformly on $xin [0,1]$. If we apply maximum modulus principle to the region
$$
{x+iy;|;0leq xleq 1,;|y|leq M}
$$ for large $M>0$, we can see that the maximum modulus of $|f_epsilon|$ cannot occur on $y=pm M$. Thus it must occur on the sides $x=0$ or $x=1$. This gives
$$
|f_epsilon(x+iy)|leq 1,quadforall xin[0,1],;|y|leq M,
$$ for all sufficiently large $M>0$ and thus
$$
|f_epsilon(x+iy)|leq 1,quadforall xin [0,1], yin mathbb{R}.
$$ Finally take $epsilonto 0$ to get the desired bound
$$
|f(x+iy)|leq 1,quadforall xin [0,1], yin mathbb{R}.
$$
answered Dec 20 '18 at 17:47
SongSong
15.7k1738
answered Dec 20 '18 at 17:47
SongSong
15.7k1738
answered Dec 20 '18 at 17:47
SongSong
15.7k1738
answered Dec 20 '18 at 17:47
SongSong
15.7k1738
15.7k1738
add a comment |
add a comment |
Thanks for contributing an answer to Mathematics Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fmath.stackexchange.com%2fquestions%2f3047785%2ff-analytic-and-f-leq1-on-a-strip%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
$begingroup$
Another way one might approach this problem is by using a mobius transformation to map the right half plane to the unit disk then apply maximum modulus principle. The map should be begin{equation} frac{z+1}{z-1} end{equation} I would attempt this because we can apply the maximum modulus principle on the unit disk, so I want to transform his onto a problem on the unit disk.
$endgroup$
– Story123
Dec 21 '18 at 18:58
$begingroup$
Actually we cannot apply Maximum modulus principle in its raw form: the reason is that $f$ cannot be continuously extended to the closure of the domain. The problem arises from the fact that $xpm iinfty$ is mapped to $1$. Unless one deals with the behavior of $f$ near $1$, maximum modulus principle does not give the result. Most likely, it only makes the problem more complicated.
$endgroup$
– Song
Dec 22 '18 at 12:36