StormCrawler debug logs in local mode
When I inspect the source of StormCrawler, there are lot of helpful debug logs. But putting a log4j.xml and adding a logger will not print those in the console. What are the steps I should follow to enable logging in StormCrawler?
logging apache-storm stormcrawler
edited Nov 23 '18 at 8:56
Julien Nioche
3,06211224
asked Nov 23 '18 at 1:34
uiroshanuiroshan
2,8602729
add a comment |
When I inspect the source of StormCrawler, there are lot of helpful debug logs. But putting a log4j.xml and adding a logger will not print those in the console. What are the steps I should follow to enable logging in StormCrawler?
logging apache-storm stormcrawler
edited Nov 23 '18 at 8:56
Julien Nioche
3,06211224
asked Nov 23 '18 at 1:34
uiroshanuiroshan
2,8602729
1
how do you run the topology? storm jar ... ?
– Julien Nioche
Nov 23 '18 at 9:03
Yes!storm jar target/crawler-1.0-SNAPSHOT.jar org.apache.storm.flux.Flux --local crawler.flux --sleep 60000to be specific.
– uiroshan
Nov 23 '18 at 15:13
add a comment |
When I inspect the source of StormCrawler, there are lot of helpful debug logs. But putting a log4j.xml and adding a logger will not print those in the console. What are the steps I should follow to enable logging in StormCrawler?
logging apache-storm stormcrawler
edited Nov 23 '18 at 8:56
Julien Nioche
3,06211224
asked Nov 23 '18 at 1:34
uiroshanuiroshan
2,8602729
When I inspect the source of StormCrawler, there are lot of helpful debug logs. But putting a log4j.xml and adding a logger will not print those in the console. What are the steps I should follow to enable logging in StormCrawler?
logging apache-storm stormcrawler
logging apache-storm stormcrawler
edited Nov 23 '18 at 8:56
Julien Nioche
3,06211224
asked Nov 23 '18 at 1:34
uiroshanuiroshan
2,8602729
edited Nov 23 '18 at 8:56
Julien Nioche
3,06211224
asked Nov 23 '18 at 1:34
uiroshanuiroshan
2,8602729
edited Nov 23 '18 at 8:56
Julien Nioche
3,06211224
edited Nov 23 '18 at 8:56
Julien Nioche
3,06211224
edited Nov 23 '18 at 8:56
Julien Nioche
3,06211224
3,06211224
asked Nov 23 '18 at 1:34
uiroshanuiroshan
2,8602729
asked Nov 23 '18 at 1:34
uiroshanuiroshan
2,8602729
asked Nov 23 '18 at 1:34
uiroshanuiroshan
2,8602729
2,8602729
1
how do you run the topology? storm jar ... ?
– Julien Nioche
Nov 23 '18 at 9:03
Yes!storm jar target/crawler-1.0-SNAPSHOT.jar org.apache.storm.flux.Flux --local crawler.flux --sleep 60000to be specific.
– uiroshan
Nov 23 '18 at 15:13
add a comment |
1
how do you run the topology? storm jar ... ?
– Julien Nioche
Nov 23 '18 at 9:03
Yes!storm jar target/crawler-1.0-SNAPSHOT.jar org.apache.storm.flux.Flux --local crawler.flux --sleep 60000to be specific.
– uiroshan
Nov 23 '18 at 15:13
1
1
how do you run the topology? storm jar ... ?
– Julien Nioche
Nov 23 '18 at 9:03
how do you run the topology? storm jar ... ?
– Julien Nioche
Nov 23 '18 at 9:03
Yes!
storm jar target/crawler-1.0-SNAPSHOT.jar org.apache.storm.flux.Flux --local crawler.flux --sleep 60000 to be specific.– uiroshan
Nov 23 '18 at 15:13
Yes!
storm jar target/crawler-1.0-SNAPSHOT.jar org.apache.storm.flux.Flux --local crawler.flux --sleep 60000 to be specific.– uiroshan
Nov 23 '18 at 15:13
add a comment |
1 Answer
1
active
oldest
votes
You should see the logs on the console when running the command above.
The log4j config used is the one from Storm e.g. /usr/share/apache-storm-1.2.2/log4j2/ and it is used in deployed mode as well.
You can specify the location of the logs for the deployed mode in the storm conf e.g. /usr/share/apache-storm-1.2.2/conf/storm.yaml
by setting
storm.log.dir: "/var/log/storm"
answered Nov 23 '18 at 16:17
Julien NiocheJulien Nioche
3,06211224
1
With above command, I can see only INFO logs. I want to turn on DEBUG logs. Also editing apache-storm-1.2.2/log4j2/ didn't work. I have debugged the code and found out logging configurations are picking from storm-core jar (there is a log4j2.xml inside the jar). However by passing -Dlog4j.configurationFile option to above command, I could see DEBUG logs.
– uiroshan
Nov 24 '18 at 8:19
add a comment |
Your Answer
StackExchange.ifUsing("editor", function () {
StackExchange.using("externalEditor", function () {
StackExchange.using("snippets", function () {
StackExchange.snippets.init();
});
});
}, "code-snippets");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "1"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f53439705%2fstormcrawler-debug-logs-in-local-mode%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
You should see the logs on the console when running the command above.
The log4j config used is the one from Storm e.g. /usr/share/apache-storm-1.2.2/log4j2/ and it is used in deployed mode as well.
You can specify the location of the logs for the deployed mode in the storm conf e.g. /usr/share/apache-storm-1.2.2/conf/storm.yaml
by setting
storm.log.dir: "/var/log/storm"
answered Nov 23 '18 at 16:17
Julien NiocheJulien Nioche
3,06211224
1
With above command, I can see only INFO logs. I want to turn on DEBUG logs. Also editing apache-storm-1.2.2/log4j2/ didn't work. I have debugged the code and found out logging configurations are picking from storm-core jar (there is a log4j2.xml inside the jar). However by passing -Dlog4j.configurationFile option to above command, I could see DEBUG logs.
– uiroshan
Nov 24 '18 at 8:19
add a comment |
You should see the logs on the console when running the command above.
The log4j config used is the one from Storm e.g. /usr/share/apache-storm-1.2.2/log4j2/ and it is used in deployed mode as well.
You can specify the location of the logs for the deployed mode in the storm conf e.g. /usr/share/apache-storm-1.2.2/conf/storm.yaml
by setting
storm.log.dir: "/var/log/storm"
answered Nov 23 '18 at 16:17
Julien NiocheJulien Nioche
3,06211224
1
With above command, I can see only INFO logs. I want to turn on DEBUG logs. Also editing apache-storm-1.2.2/log4j2/ didn't work. I have debugged the code and found out logging configurations are picking from storm-core jar (there is a log4j2.xml inside the jar). However by passing -Dlog4j.configurationFile option to above command, I could see DEBUG logs.
– uiroshan
Nov 24 '18 at 8:19
add a comment |
You should see the logs on the console when running the command above.
The log4j config used is the one from Storm e.g. /usr/share/apache-storm-1.2.2/log4j2/ and it is used in deployed mode as well.
You can specify the location of the logs for the deployed mode in the storm conf e.g. /usr/share/apache-storm-1.2.2/conf/storm.yaml
by setting
storm.log.dir: "/var/log/storm"
answered Nov 23 '18 at 16:17
Julien NiocheJulien Nioche
3,06211224
You should see the logs on the console when running the command above.
The log4j config used is the one from Storm e.g. /usr/share/apache-storm-1.2.2/log4j2/ and it is used in deployed mode as well.
You can specify the location of the logs for the deployed mode in the storm conf e.g. /usr/share/apache-storm-1.2.2/conf/storm.yaml
by setting
storm.log.dir: "/var/log/storm"
answered Nov 23 '18 at 16:17
Julien NiocheJulien Nioche
3,06211224
answered Nov 23 '18 at 16:17
Julien NiocheJulien Nioche
3,06211224
answered Nov 23 '18 at 16:17
Julien NiocheJulien Nioche
3,06211224
answered Nov 23 '18 at 16:17
Julien NiocheJulien Nioche
3,06211224
3,06211224
1
With above command, I can see only INFO logs. I want to turn on DEBUG logs. Also editing apache-storm-1.2.2/log4j2/ didn't work. I have debugged the code and found out logging configurations are picking from storm-core jar (there is a log4j2.xml inside the jar). However by passing -Dlog4j.configurationFile option to above command, I could see DEBUG logs.
– uiroshan
Nov 24 '18 at 8:19
add a comment |
1
With above command, I can see only INFO logs. I want to turn on DEBUG logs. Also editing apache-storm-1.2.2/log4j2/ didn't work. I have debugged the code and found out logging configurations are picking from storm-core jar (there is a log4j2.xml inside the jar). However by passing -Dlog4j.configurationFile option to above command, I could see DEBUG logs.
– uiroshan
Nov 24 '18 at 8:19
1
1
With above command, I can see only INFO logs. I want to turn on DEBUG logs. Also editing apache-storm-1.2.2/log4j2/ didn't work. I have debugged the code and found out logging configurations are picking from storm-core jar (there is a log4j2.xml inside the jar). However by passing -Dlog4j.configurationFile option to above command, I could see DEBUG logs.
– uiroshan
Nov 24 '18 at 8:19
With above command, I can see only INFO logs. I want to turn on DEBUG logs. Also editing apache-storm-1.2.2/log4j2/ didn't work. I have debugged the code and found out logging configurations are picking from storm-core jar (there is a log4j2.xml inside the jar). However by passing -Dlog4j.configurationFile option to above command, I could see DEBUG logs.
– uiroshan
Nov 24 '18 at 8:19
add a comment |
Thanks for contributing an answer to Stack Overflow!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f53439705%2fstormcrawler-debug-logs-in-local-mode%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
1
how do you run the topology? storm jar ... ?
– Julien Nioche
Nov 23 '18 at 9:03
Yes!
storm jar target/crawler-1.0-SNAPSHOT.jar org.apache.storm.flux.Flux --local crawler.flux --sleep 60000to be specific.– uiroshan
Nov 23 '18 at 15:13