Why don`t we use extremely thin oils in engines
I understand that lower viscosity oils are way easier to pump and move around engine parts, also they form a thinner "film" on friction surfaces which could improve parts measurements precision etc.
Is it only due to increased piston rings leakage that we don't use extremely thin oils?
Are they more prone to failure in operating and high temperatures?
Are these oils easier contaminated? Maybe they are very expensive to produce???
oil engine-theory oil-viscosity
asked Nov 20 at 14:53
kokobill
406120
add a comment |
I understand that lower viscosity oils are way easier to pump and move around engine parts, also they form a thinner "film" on friction surfaces which could improve parts measurements precision etc.
Is it only due to increased piston rings leakage that we don't use extremely thin oils?
Are they more prone to failure in operating and high temperatures?
Are these oils easier contaminated? Maybe they are very expensive to produce???
oil engine-theory oil-viscosity
asked Nov 20 at 14:53
kokobill
406120
add a comment |
I understand that lower viscosity oils are way easier to pump and move around engine parts, also they form a thinner "film" on friction surfaces which could improve parts measurements precision etc.
Is it only due to increased piston rings leakage that we don't use extremely thin oils?
Are they more prone to failure in operating and high temperatures?
Are these oils easier contaminated? Maybe they are very expensive to produce???
oil engine-theory oil-viscosity
asked Nov 20 at 14:53
kokobill
406120
I understand that lower viscosity oils are way easier to pump and move around engine parts, also they form a thinner "film" on friction surfaces which could improve parts measurements precision etc.
Is it only due to increased piston rings leakage that we don't use extremely thin oils?
Are they more prone to failure in operating and high temperatures?
Are these oils easier contaminated? Maybe they are very expensive to produce???
oil engine-theory oil-viscosity
oil engine-theory oil-viscosity
asked Nov 20 at 14:53
kokobill
406120
asked Nov 20 at 14:53
kokobill
406120
asked Nov 20 at 14:53
kokobill
406120
asked Nov 20 at 14:53
kokobill
406120
asked Nov 20 at 14:53
kokobill
406120
406120
add a comment |
add a comment |
3 Answers
3
active
oldest
votes
Thin oils tend to have a very poor shear stability, especially when they are hot. The function of the oil is to protect and lubricate the engine and ancillaries (i.e. turbo chargers). In certain applications it also makes up some (where an oil cooler is employed) or all (for aircooled engines such as the Beetle) of the circulated liquid cooling system.
I'm not sure that an oil which is consistently thin and remains so once upto operating temperature exists. Most engine oils are chosen so that they will provide some protection at cold start but optimum protection when they reach their target temperature.
answered Nov 20 at 15:00
Steve Matthews
19.7k22970
add a comment |
Tribology is a huge topic...
But, the thinner the oil, then the more oil in terms of volume and/or the higher pressure is needed for a given tolerance between bearing and surface.
So many things are taken into account when specifying the oil for a particular use. Operating temperature, load on the bearings, relative speed of the bearing etc etc
answered Nov 20 at 14:58
Solar Mike
17.6k21030
add a comment |
We are, or are starting to, for exactly the reasons you quote.
New vehicles (VAG group for example) are starting to use 0W20 oil, with 0W16-capable engines coming soon and tests being conducted with oil as thin as 0W8.
Source: MTZ worldwide 12/2018, "Potentials and Risks of Reducing Friction with Future Ultra-low-viscosity Engine Oils"
answered Nov 20 at 21:42
Tobias Weiß
1112
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "224"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fmechanics.stackexchange.com%2fquestions%2f61060%2fwhy-dont-we-use-extremely-thin-oils-in-engines%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
3 Answers
3
active
oldest
votes
3 Answers
3
active
oldest
votes
active
oldest
votes
active
oldest
votes
Thin oils tend to have a very poor shear stability, especially when they are hot. The function of the oil is to protect and lubricate the engine and ancillaries (i.e. turbo chargers). In certain applications it also makes up some (where an oil cooler is employed) or all (for aircooled engines such as the Beetle) of the circulated liquid cooling system.
I'm not sure that an oil which is consistently thin and remains so once upto operating temperature exists. Most engine oils are chosen so that they will provide some protection at cold start but optimum protection when they reach their target temperature.
answered Nov 20 at 15:00
Steve Matthews
19.7k22970
add a comment |
Thin oils tend to have a very poor shear stability, especially when they are hot. The function of the oil is to protect and lubricate the engine and ancillaries (i.e. turbo chargers). In certain applications it also makes up some (where an oil cooler is employed) or all (for aircooled engines such as the Beetle) of the circulated liquid cooling system.
I'm not sure that an oil which is consistently thin and remains so once upto operating temperature exists. Most engine oils are chosen so that they will provide some protection at cold start but optimum protection when they reach their target temperature.
answered Nov 20 at 15:00
Steve Matthews
19.7k22970
add a comment |
Thin oils tend to have a very poor shear stability, especially when they are hot. The function of the oil is to protect and lubricate the engine and ancillaries (i.e. turbo chargers). In certain applications it also makes up some (where an oil cooler is employed) or all (for aircooled engines such as the Beetle) of the circulated liquid cooling system.
I'm not sure that an oil which is consistently thin and remains so once upto operating temperature exists. Most engine oils are chosen so that they will provide some protection at cold start but optimum protection when they reach their target temperature.
answered Nov 20 at 15:00
Steve Matthews
19.7k22970
Thin oils tend to have a very poor shear stability, especially when they are hot. The function of the oil is to protect and lubricate the engine and ancillaries (i.e. turbo chargers). In certain applications it also makes up some (where an oil cooler is employed) or all (for aircooled engines such as the Beetle) of the circulated liquid cooling system.
I'm not sure that an oil which is consistently thin and remains so once upto operating temperature exists. Most engine oils are chosen so that they will provide some protection at cold start but optimum protection when they reach their target temperature.
answered Nov 20 at 15:00
Steve Matthews
19.7k22970
answered Nov 20 at 15:00
Steve Matthews
19.7k22970
answered Nov 20 at 15:00
Steve Matthews
19.7k22970
answered Nov 20 at 15:00
Steve Matthews
19.7k22970
19.7k22970
add a comment |
add a comment |
Tribology is a huge topic...
But, the thinner the oil, then the more oil in terms of volume and/or the higher pressure is needed for a given tolerance between bearing and surface.
So many things are taken into account when specifying the oil for a particular use. Operating temperature, load on the bearings, relative speed of the bearing etc etc
answered Nov 20 at 14:58
Solar Mike
17.6k21030
add a comment |
Tribology is a huge topic...
But, the thinner the oil, then the more oil in terms of volume and/or the higher pressure is needed for a given tolerance between bearing and surface.
So many things are taken into account when specifying the oil for a particular use. Operating temperature, load on the bearings, relative speed of the bearing etc etc
answered Nov 20 at 14:58
Solar Mike
17.6k21030
add a comment |
Tribology is a huge topic...
But, the thinner the oil, then the more oil in terms of volume and/or the higher pressure is needed for a given tolerance between bearing and surface.
So many things are taken into account when specifying the oil for a particular use. Operating temperature, load on the bearings, relative speed of the bearing etc etc
answered Nov 20 at 14:58
Solar Mike
17.6k21030
Tribology is a huge topic...
But, the thinner the oil, then the more oil in terms of volume and/or the higher pressure is needed for a given tolerance between bearing and surface.
So many things are taken into account when specifying the oil for a particular use. Operating temperature, load on the bearings, relative speed of the bearing etc etc
answered Nov 20 at 14:58
Solar Mike
17.6k21030
answered Nov 20 at 14:58
Solar Mike
17.6k21030
answered Nov 20 at 14:58
Solar Mike
17.6k21030
answered Nov 20 at 14:58
Solar Mike
17.6k21030
17.6k21030
add a comment |
add a comment |
We are, or are starting to, for exactly the reasons you quote.
New vehicles (VAG group for example) are starting to use 0W20 oil, with 0W16-capable engines coming soon and tests being conducted with oil as thin as 0W8.
Source: MTZ worldwide 12/2018, "Potentials and Risks of Reducing Friction with Future Ultra-low-viscosity Engine Oils"
answered Nov 20 at 21:42
Tobias Weiß
1112
add a comment |
We are, or are starting to, for exactly the reasons you quote.
New vehicles (VAG group for example) are starting to use 0W20 oil, with 0W16-capable engines coming soon and tests being conducted with oil as thin as 0W8.
Source: MTZ worldwide 12/2018, "Potentials and Risks of Reducing Friction with Future Ultra-low-viscosity Engine Oils"
answered Nov 20 at 21:42
Tobias Weiß
1112
add a comment |
We are, or are starting to, for exactly the reasons you quote.
New vehicles (VAG group for example) are starting to use 0W20 oil, with 0W16-capable engines coming soon and tests being conducted with oil as thin as 0W8.
Source: MTZ worldwide 12/2018, "Potentials and Risks of Reducing Friction with Future Ultra-low-viscosity Engine Oils"
answered Nov 20 at 21:42
Tobias Weiß
1112
We are, or are starting to, for exactly the reasons you quote.
New vehicles (VAG group for example) are starting to use 0W20 oil, with 0W16-capable engines coming soon and tests being conducted with oil as thin as 0W8.
Source: MTZ worldwide 12/2018, "Potentials and Risks of Reducing Friction with Future Ultra-low-viscosity Engine Oils"
answered Nov 20 at 21:42
Tobias Weiß
1112
edited Nov 22 at 6:12
answered Nov 20 at 21:42
Tobias Weiß
1112
answered Nov 20 at 21:42
Tobias Weiß
1112
answered Nov 20 at 21:42
Tobias Weiß
1112
1112
add a comment |
add a comment |
Thanks for contributing an answer to Motor Vehicle Maintenance & Repair Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fmechanics.stackexchange.com%2fquestions%2f61060%2fwhy-dont-we-use-extremely-thin-oils-in-engines%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
