Multiple powered up trains on 1 Bluetooth controller?

My daughter got a Passenger Train for Christmas and I converted one of my old 9v trains to run using the powered up system. Is it possible to run the 2 trains independently or concurrently (preferably independently) on the one remote?

I’ve tried all sorts and have struggled to find anything that helps me.

edited Dec 27 '18 at 17:09

chicks

2,38821031

asked Dec 27 '18 at 16:44

Stereo

283

Based on bricks.stackexchange.com/q/10486/6174 it seems like there is a 1:1 relationship unless you use some sort of proxy.

– chicks
Dec 27 '18 at 17:10

2

This is a video tutorial that describes how to control two motors or hubs with one controller. They are on the same channel so when the plus button is hit, both motors react to it and start rolling. This solution is useful when one needs two or more motors in a larger train.

– Venderwel
Jan 8 at 6:59

add a comment |

I’ve tried all sorts and have struggled to find anything that helps me.

edited Dec 27 '18 at 17:09

chicks

2,38821031

asked Dec 27 '18 at 16:44

Stereo

283

Based on bricks.stackexchange.com/q/10486/6174 it seems like there is a 1:1 relationship unless you use some sort of proxy.

– chicks
Dec 27 '18 at 17:10

2

This is a video tutorial that describes how to control two motors or hubs with one controller. They are on the same channel so when the plus button is hit, both motors react to it and start rolling. This solution is useful when one needs two or more motors in a larger train.

– Venderwel
Jan 8 at 6:59

add a comment |

I’ve tried all sorts and have struggled to find anything that helps me.

edited Dec 27 '18 at 17:09

chicks

2,38821031

asked Dec 27 '18 at 16:44

Stereo

283

I’ve tried all sorts and have struggled to find anything that helps me.

trains powered-up

edited Dec 27 '18 at 17:09

chicks

2,38821031

asked Dec 27 '18 at 16:44

Stereo

283

edited Dec 27 '18 at 17:09

chicks

2,38821031

asked Dec 27 '18 at 16:44

Stereo

283

edited Dec 27 '18 at 17:09

chicks

2,38821031

edited Dec 27 '18 at 17:09

chicks

2,38821031

edited Dec 27 '18 at 17:09

chicks

2,38821031

asked Dec 27 '18 at 16:44

Stereo

283

asked Dec 27 '18 at 16:44

Stereo

283

asked Dec 27 '18 at 16:44

Stereo

283

Based on bricks.stackexchange.com/q/10486/6174 it seems like there is a 1:1 relationship unless you use some sort of proxy.

– chicks
Dec 27 '18 at 17:10

2

This is a video tutorial that describes how to control two motors or hubs with one controller. They are on the same channel so when the plus button is hit, both motors react to it and start rolling. This solution is useful when one needs two or more motors in a larger train.

– Venderwel
Jan 8 at 6:59

add a comment |

Based on bricks.stackexchange.com/q/10486/6174 it seems like there is a 1:1 relationship unless you use some sort of proxy.

– chicks
Dec 27 '18 at 17:10

2

This is a video tutorial that describes how to control two motors or hubs with one controller. They are on the same channel so when the plus button is hit, both motors react to it and start rolling. This solution is useful when one needs two or more motors in a larger train.

– Venderwel
Jan 8 at 6:59

Based on bricks.stackexchange.com/q/10486/6174 it seems like there is a 1:1 relationship unless you use some sort of proxy.

– chicks
Dec 27 '18 at 17:10

This is a video tutorial that describes how to control two motors or hubs with one controller. They are on the same channel so when the plus button is hit, both motors react to it and start rolling. This solution is useful when one needs two or more motors in a larger train.

– Venderwel
Jan 8 at 6:59

add a comment |

2 Answers
2

active

oldest

votes

Each train needs the following two components:

Train motor

I'll assume you purchased a second set of these to convert your 9V train with, since you're asking how to control both trains using the same remote.

The LEGO Powered Up team has provided an FAQ for Powered Up which contains instructions for how to pair multiple Powered Up Smarthubs with one remote, on either the same channel or different channels:

How can one single BT remote be used to control multiple receivers or switch among them? Will this be possible in the app?

You can link up to 5 devices (Smart Hubs or Smart Controllers) together.

To create a network you first need to connect a Samrt Hub [sic] and a Smart Controller.

First Hub connection

Turn Hub and Controller ON by pressing their green buttons and they will link. The LED will blink white and then shift to same channel color e.g. blue. You can now change the channel color by pressing the green button on the hub and toggle through the 5 channel colors. When turning OFF the Hub or Controller the last connection is remembered and re-established when turning both ON.

Adding Hub to network

With the first Hub and the Controller ON and connected you can add extra Hubs to the network by turning the new Hub ON and then press both green buttons simultaneously on the new Hub and one of the components in the network (Hub or Controller). The new Hub is now added to the network with the same channel color as the currently selected channel. Again toggle to another channel by pressing the green button on the Hub. When more Hubs on different channels are added to the network you toggle between the different channels by pressing the green button on the Controller.

Note: The current Powered UP app supports control of a single train.

Note that when you have two Smarthubs paired with the remote on the same channel, when you press a speed control button on the left side of the remote, both Smarthubs will respond. This is shown in a video by HispaBrick Magazine. This means you'll start both trains concurrently with a single button press. To avoid this:

Change the channel on one of the hubs by pressing the green button once. You can then switch to this channel on the remote by pressing the green button on the remote, and cycle through all 5 channels back to the other hub to control that other hub again.

Or if you want to be able to control each hub independently using each side of the remote without having to change channels on the controller, simply switch the plug on one of the hubs to the other port while both are still paired on the same channel.

The second port is typically used with a different device such as a Powered Up LED Light which you can install into your Passenger Train and you'd control the train motor and the LED light independently; however, it's not possible to have both motor and light controls and control two independent trains all on the same channel.

edited Dec 27 '18 at 18:06

answered Dec 27 '18 at 17:30

LegoSonicBoy

1,8701232

1

Ah, your answer is much better then mine! Upvoted. :)

– TheBrickBlogger
Dec 27 '18 at 17:35

Thanks very much for your detailed response. I have had continued problems linking the second train, it just continues flashing but I will reset everything and try again this evening following the above.

– Stereo
Dec 27 '18 at 18:10

@Stereo: Let me know if it works out!

– LegoSonicBoy
Dec 27 '18 at 18:12

@LegoSonicBoy. I have tried to pair it as per the instructions (which incidentally is pretty much the way I had bee previously trying) and the second train/hub fails to join the network. The second hub when switched on flashes white but I cannot get it to then pair with either a hub or controller on the network.

– Stereo
Dec 28 '18 at 0:00

1

@LegoSonicBoy. I have since followed the HispaBrick video you linked and have managed to link the 2 trains to one controller and all is working as desired! I have hunted youtube and failed miserably finding anything that worked for me so thanks for the link.

– Stereo
Dec 28 '18 at 0:18

|
show 1 more comment

According to the LEGO Customer service website, you can control multiple train with the remote control, but not the app. Currently the Powered Up App only controls one Powered Up Hub at a time. Source: https://www.lego.com/en-MY/service/help-topics/digital/device-guides/powered-up/control-multiple

A more specific answer can be found in the LEGO City website: You can run up to 5 trains at the same time from one remote control. There are 5 channels on the remote control (you can tell them apart by their different colors) that can connect to up to 5 Smarthubs. Source: https://www.lego.com/en-us/themes/city/articles/question-06-028c2ae86b684ac78d5c7448e869c88a

answered Dec 27 '18 at 17:34

TheBrickBlogger

8,43011626

add a comment |

Your Answer

StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "336"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);

StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});

function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});

}
});

draft saved

draft discarded

Sign up or log in

StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});

Post as a guest

Name

Required, but never shown

StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fbricks.stackexchange.com%2fquestions%2f10744%2fmultiple-powered-up-trains-on-1-bluetooth-controller%23new-answer', 'question_page');
}
);

Post as a guest

Name

Required, but never shown

2 Answers
2

active

oldest

votes

2 Answers
2

active

oldest

votes

Each train needs the following two components:

Train motor

I'll assume you purchased a second set of these to convert your 9V train with, since you're asking how to control both trains using the same remote.

How can one single BT remote be used to control multiple receivers or switch among them? Will this be possible in the app?

You can link up to 5 devices (Smart Hubs or Smart Controllers) together.

To create a network you first need to connect a Samrt Hub [sic] and a Smart Controller.

First Hub connection

Turn Hub and Controller ON by pressing their green buttons and they will link. The LED will blink white and then shift to same channel color e.g. blue. You can now change the channel color by pressing the green button on the hub and toggle through the 5 channel colors. When turning OFF the Hub or Controller the last connection is remembered and re-established when turning both ON.

Adding Hub to network

With the first Hub and the Controller ON and connected you can add extra Hubs to the network by turning the new Hub ON and then press both green buttons simultaneously on the new Hub and one of the components in the network (Hub or Controller). The new Hub is now added to the network with the same channel color as the currently selected channel. Again toggle to another channel by pressing the green button on the Hub. When more Hubs on different channels are added to the network you toggle between the different channels by pressing the green button on the Controller.

Note: The current Powered UP app supports control of a single train.

Change the channel on one of the hubs by pressing the green button once. You can then switch to this channel on the remote by pressing the green button on the remote, and cycle through all 5 channels back to the other hub to control that other hub again.

Or if you want to be able to control each hub independently using each side of the remote without having to change channels on the controller, simply switch the plug on one of the hubs to the other port while both are still paired on the same channel.

The second port is typically used with a different device such as a Powered Up LED Light which you can install into your Passenger Train and you'd control the train motor and the LED light independently; however, it's not possible to have both motor and light controls and control two independent trains all on the same channel.

edited Dec 27 '18 at 18:06

answered Dec 27 '18 at 17:30

LegoSonicBoy

1,8701232

1

Ah, your answer is much better then mine! Upvoted. :)

– TheBrickBlogger
Dec 27 '18 at 17:35

Thanks very much for your detailed response. I have had continued problems linking the second train, it just continues flashing but I will reset everything and try again this evening following the above.

– Stereo
Dec 27 '18 at 18:10

@Stereo: Let me know if it works out!

– LegoSonicBoy
Dec 27 '18 at 18:12

@LegoSonicBoy. I have tried to pair it as per the instructions (which incidentally is pretty much the way I had bee previously trying) and the second train/hub fails to join the network. The second hub when switched on flashes white but I cannot get it to then pair with either a hub or controller on the network.

– Stereo
Dec 28 '18 at 0:00

1

@LegoSonicBoy. I have since followed the HispaBrick video you linked and have managed to link the 2 trains to one controller and all is working as desired! I have hunted youtube and failed miserably finding anything that worked for me so thanks for the link.

– Stereo
Dec 28 '18 at 0:18

|
show 1 more comment

Each train needs the following two components:

Train motor

I'll assume you purchased a second set of these to convert your 9V train with, since you're asking how to control both trains using the same remote.

How can one single BT remote be used to control multiple receivers or switch among them? Will this be possible in the app?

You can link up to 5 devices (Smart Hubs or Smart Controllers) together.

To create a network you first need to connect a Samrt Hub [sic] and a Smart Controller.

First Hub connection

Turn Hub and Controller ON by pressing their green buttons and they will link. The LED will blink white and then shift to same channel color e.g. blue. You can now change the channel color by pressing the green button on the hub and toggle through the 5 channel colors. When turning OFF the Hub or Controller the last connection is remembered and re-established when turning both ON.

Adding Hub to network

With the first Hub and the Controller ON and connected you can add extra Hubs to the network by turning the new Hub ON and then press both green buttons simultaneously on the new Hub and one of the components in the network (Hub or Controller). The new Hub is now added to the network with the same channel color as the currently selected channel. Again toggle to another channel by pressing the green button on the Hub. When more Hubs on different channels are added to the network you toggle between the different channels by pressing the green button on the Controller.

Note: The current Powered UP app supports control of a single train.

Change the channel on one of the hubs by pressing the green button once. You can then switch to this channel on the remote by pressing the green button on the remote, and cycle through all 5 channels back to the other hub to control that other hub again.

Or if you want to be able to control each hub independently using each side of the remote without having to change channels on the controller, simply switch the plug on one of the hubs to the other port while both are still paired on the same channel.

The second port is typically used with a different device such as a Powered Up LED Light which you can install into your Passenger Train and you'd control the train motor and the LED light independently; however, it's not possible to have both motor and light controls and control two independent trains all on the same channel.

edited Dec 27 '18 at 18:06

answered Dec 27 '18 at 17:30

LegoSonicBoy

1,8701232

1

Ah, your answer is much better then mine! Upvoted. :)

– TheBrickBlogger
Dec 27 '18 at 17:35

Thanks very much for your detailed response. I have had continued problems linking the second train, it just continues flashing but I will reset everything and try again this evening following the above.

– Stereo
Dec 27 '18 at 18:10

@Stereo: Let me know if it works out!

– LegoSonicBoy
Dec 27 '18 at 18:12

@LegoSonicBoy. I have tried to pair it as per the instructions (which incidentally is pretty much the way I had bee previously trying) and the second train/hub fails to join the network. The second hub when switched on flashes white but I cannot get it to then pair with either a hub or controller on the network.

– Stereo
Dec 28 '18 at 0:00

1

@LegoSonicBoy. I have since followed the HispaBrick video you linked and have managed to link the 2 trains to one controller and all is working as desired! I have hunted youtube and failed miserably finding anything that worked for me so thanks for the link.

– Stereo
Dec 28 '18 at 0:18

|
show 1 more comment

Each train needs the following two components:

Train motor

I'll assume you purchased a second set of these to convert your 9V train with, since you're asking how to control both trains using the same remote.

How can one single BT remote be used to control multiple receivers or switch among them? Will this be possible in the app?

You can link up to 5 devices (Smart Hubs or Smart Controllers) together.

To create a network you first need to connect a Samrt Hub [sic] and a Smart Controller.

First Hub connection

Turn Hub and Controller ON by pressing their green buttons and they will link. The LED will blink white and then shift to same channel color e.g. blue. You can now change the channel color by pressing the green button on the hub and toggle through the 5 channel colors. When turning OFF the Hub or Controller the last connection is remembered and re-established when turning both ON.

Adding Hub to network

With the first Hub and the Controller ON and connected you can add extra Hubs to the network by turning the new Hub ON and then press both green buttons simultaneously on the new Hub and one of the components in the network (Hub or Controller). The new Hub is now added to the network with the same channel color as the currently selected channel. Again toggle to another channel by pressing the green button on the Hub. When more Hubs on different channels are added to the network you toggle between the different channels by pressing the green button on the Controller.

Note: The current Powered UP app supports control of a single train.

Change the channel on one of the hubs by pressing the green button once. You can then switch to this channel on the remote by pressing the green button on the remote, and cycle through all 5 channels back to the other hub to control that other hub again.

Or if you want to be able to control each hub independently using each side of the remote without having to change channels on the controller, simply switch the plug on one of the hubs to the other port while both are still paired on the same channel.

The second port is typically used with a different device such as a Powered Up LED Light which you can install into your Passenger Train and you'd control the train motor and the LED light independently; however, it's not possible to have both motor and light controls and control two independent trains all on the same channel.

edited Dec 27 '18 at 18:06

answered Dec 27 '18 at 17:30

LegoSonicBoy

1,8701232

Each train needs the following two components:

Train motor

I'll assume you purchased a second set of these to convert your 9V train with, since you're asking how to control both trains using the same remote.

How can one single BT remote be used to control multiple receivers or switch among them? Will this be possible in the app?

You can link up to 5 devices (Smart Hubs or Smart Controllers) together.

To create a network you first need to connect a Samrt Hub [sic] and a Smart Controller.

First Hub connection

Turn Hub and Controller ON by pressing their green buttons and they will link. The LED will blink white and then shift to same channel color e.g. blue. You can now change the channel color by pressing the green button on the hub and toggle through the 5 channel colors. When turning OFF the Hub or Controller the last connection is remembered and re-established when turning both ON.

Adding Hub to network

With the first Hub and the Controller ON and connected you can add extra Hubs to the network by turning the new Hub ON and then press both green buttons simultaneously on the new Hub and one of the components in the network (Hub or Controller). The new Hub is now added to the network with the same channel color as the currently selected channel. Again toggle to another channel by pressing the green button on the Hub. When more Hubs on different channels are added to the network you toggle between the different channels by pressing the green button on the Controller.

Note: The current Powered UP app supports control of a single train.

Change the channel on one of the hubs by pressing the green button once. You can then switch to this channel on the remote by pressing the green button on the remote, and cycle through all 5 channels back to the other hub to control that other hub again.

Or if you want to be able to control each hub independently using each side of the remote without having to change channels on the controller, simply switch the plug on one of the hubs to the other port while both are still paired on the same channel.

The second port is typically used with a different device such as a Powered Up LED Light which you can install into your Passenger Train and you'd control the train motor and the LED light independently; however, it's not possible to have both motor and light controls and control two independent trains all on the same channel.

edited Dec 27 '18 at 18:06

answered Dec 27 '18 at 17:30

LegoSonicBoy

1,8701232

edited Dec 27 '18 at 18:06

answered Dec 27 '18 at 17:30

LegoSonicBoy

1,8701232

answered Dec 27 '18 at 17:30

LegoSonicBoy

1,8701232

answered Dec 27 '18 at 17:30

LegoSonicBoy

1,8701232

1

Ah, your answer is much better then mine! Upvoted. :)

– TheBrickBlogger
Dec 27 '18 at 17:35

Thanks very much for your detailed response. I have had continued problems linking the second train, it just continues flashing but I will reset everything and try again this evening following the above.

– Stereo
Dec 27 '18 at 18:10

@Stereo: Let me know if it works out!

– LegoSonicBoy
Dec 27 '18 at 18:12

@LegoSonicBoy. I have tried to pair it as per the instructions (which incidentally is pretty much the way I had bee previously trying) and the second train/hub fails to join the network. The second hub when switched on flashes white but I cannot get it to then pair with either a hub or controller on the network.

– Stereo
Dec 28 '18 at 0:00

1

@LegoSonicBoy. I have since followed the HispaBrick video you linked and have managed to link the 2 trains to one controller and all is working as desired! I have hunted youtube and failed miserably finding anything that worked for me so thanks for the link.

– Stereo
Dec 28 '18 at 0:18

|
show 1 more comment

1

Ah, your answer is much better then mine! Upvoted. :)

– TheBrickBlogger
Dec 27 '18 at 17:35

Thanks very much for your detailed response. I have had continued problems linking the second train, it just continues flashing but I will reset everything and try again this evening following the above.

– Stereo
Dec 27 '18 at 18:10

@Stereo: Let me know if it works out!

– LegoSonicBoy
Dec 27 '18 at 18:12

@LegoSonicBoy. I have tried to pair it as per the instructions (which incidentally is pretty much the way I had bee previously trying) and the second train/hub fails to join the network. The second hub when switched on flashes white but I cannot get it to then pair with either a hub or controller on the network.

– Stereo
Dec 28 '18 at 0:00

1

@LegoSonicBoy. I have since followed the HispaBrick video you linked and have managed to link the 2 trains to one controller and all is working as desired! I have hunted youtube and failed miserably finding anything that worked for me so thanks for the link.

– Stereo
Dec 28 '18 at 0:18

Ah, your answer is much better then mine! Upvoted. :)

– TheBrickBlogger
Dec 27 '18 at 17:35

Thanks very much for your detailed response. I have had continued problems linking the second train, it just continues flashing but I will reset everything and try again this evening following the above.

– Stereo
Dec 27 '18 at 18:10

@Stereo: Let me know if it works out!

– LegoSonicBoy
Dec 27 '18 at 18:12

@LegoSonicBoy. I have tried to pair it as per the instructions (which incidentally is pretty much the way I had bee previously trying) and the second train/hub fails to join the network. The second hub when switched on flashes white but I cannot get it to then pair with either a hub or controller on the network.

– Stereo
Dec 28 '18 at 0:00

@LegoSonicBoy. I have since followed the HispaBrick video you linked and have managed to link the 2 trains to one controller and all is working as desired! I have hunted youtube and failed miserably finding anything that worked for me so thanks for the link.

– Stereo
Dec 28 '18 at 0:18

|
show 1 more comment

answered Dec 27 '18 at 17:34

TheBrickBlogger

8,43011626

add a comment |

answered Dec 27 '18 at 17:34

TheBrickBlogger

8,43011626

add a comment |

answered Dec 27 '18 at 17:34

TheBrickBlogger

8,43011626

answered Dec 27 '18 at 17:34

TheBrickBlogger

8,43011626

answered Dec 27 '18 at 17:34

TheBrickBlogger

8,43011626

answered Dec 27 '18 at 17:34

TheBrickBlogger

8,43011626

answered Dec 27 '18 at 17:34

TheBrickBlogger

8,43011626

add a comment |

draft saved

draft discarded

Thanks for contributing an answer to Bricks!

Please be sure to answer the question. Provide details and share your research!

But avoid …

Asking for help, clarification, or responding to other answers.

Making statements based on opinion; back them up with references or personal experience.

To learn more, see our tips on writing great answers.

draft saved

draft discarded

Sign up or log in

StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});

Post as a guest

Name

Required, but never shown

Post as a guest

Name

Required, but never shown

Sign up or log in

StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});

Post as a guest

Name

Required, but never shown

Sign up or log in

StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});

Post as a guest

Name

Required, but never shown

Sign up or log in

StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});

Post as a guest

Name

Required, but never shown

Name

Required, but never shown

Name

Required, but never shown

This page is only for reference, If you need detailed information, please check here

搜尋此網誌

Ytukyg