Ytukyg

Two weeks and you are thinking of quitting? No, no, no that will not do.

For anything even starting to be complex two weeks is just not enough time to call it quits. Learning takes time. How much time depends entirely on your effort. You have a good motivator to learn blender, to get into University. So do not loose sight of your goal.

Now how to go about that.

Stop watching tutorials. That's right, Stop watching tutorials. You said yourself that you "forget everything and the things I've learned are just gone." (That is because you never actually learned them, you just saw some guy on youtube do something). I bet you have spent a fair bit of time watching tutorials. Look at the outcome, for you it is not worth it.

This is a common problem with tutorials. We watch all these tutorials, and feel great "look at what I can do." Except if you just watch them, its nothing more then a movie. We feel like we conquered the world, but really we just sat on our butt for two hours.

So with tutorials out of the way, just make something. Start simple, such as the desk your sitting at. Yes it will be hard, your model will be pretty bad, and you will get stuck. However this is how you learn.

Ok so you are modeling, you hit a wall, no idea how to do X. Search for that thing (you very likely will get an answer from this site), then keep modeling.

It is ok to have to ask google how to do every step.

Here's the exciting part. You open blender up on day two, start by making another simple object. Say a wood stove. Now instead of having to search for everything you remembered that GG is edge slide, and why you should be moving that edge loop.

_{Image from HomeDepo}

Keep it up. Make something, anything every day. Keep it very simple. If you try to bite off more then you can do you will get discouraged and then it is easy to skip blender today, and down the spiral you fall.

Make a simple object everyday for a week and I guarantee you will learn more in that week then you have in all the time you spent in blender and watching tutorials up to this point.

Don't get discouraged when your models don't look like you wanted, or your renders aren't pretty. This is part of the learning process. I bet your first steps as a baby weren't too good either.

Please do not feel like you have to remember everything or every keyboard shortcut. Many times I have searched for something and found the answer, only to discover that I wrote the answer!

TLDR

Stop watching tutorials and just make stuff, mistakes included, in blender.

Yes, give up right now.

The only person who can effectively answer this question is you.

If the guitar you were going to learn is in the back of the cupboard, or the piano is covered in dust, or... give up.

Like Hendrix makes the guitar look easy, a seasoned modeller makes modelling look simple. Frustratingly it isn't. Hendrix is often put forward as an example that mastering a skill takes 10,000 hours.

It's hat season, and wearing my amateur's philosopher reverse-psychologist, devil's advocate hat, and for the sake of "balance" I say quit.

If however you have the desire to learn, don't accept this answer.

Don't quit. You are only two weeks learning Blender and that is too soon to quit. At the beginning, I had great difficulty in learning Blender, but I stayed at it and persisted. The more I persisted, the more I learned.
Persistence and patience pay off.

PLAYLISTS FOR ABSOLUTE BEGINNERS (see below)
(Some would interest intermediates as well). Some tutorials are somewhat old, but they are very useful and they can quickly pull you up on Blender. Neil Hirsig is very good. He is very thorough with teaching basics. His tutorials will shortly leave you with a swollen brain.

JcChronBlenderBasics
https://www.youtube.com/user/jchronblenderbasics

Jacob Lewis (2012) ‪https://www.youtube.com/playlist?list=PL03BAC38A5E823407‬
Jacob Lewis (2014) ‪https://www.youtube.com/playlist?list=PLrgQj91MOVfjTShOMRY8TLmkJ7OFr7bj6

Neal Hirsig
http://doug56.net/3DBlenderCourse/course-content.html

All these answers are opinionated suggestions for what works for the author of each answer. Votes do not signify what is correct, but instead just tell that the voter has the same learning style. Take inspiration, but figure out what will work for you on your own.

Let's actually address your problem and that is:

I feel like I forget everything and the things I've learned are just gone.

I (...) feel like I am unable to create anything

Pushing through, not quitting, watching tutorials, not watching tutorials - it won't solve your frustration. You need to solve how to memorize(learn) more efficiently.

My guess is you watch too many different tutorials, each on different topic. You create a short-term memory, and with next tutorial it gets overwritten.

My advise is to pick a topic (like modelling, texturing, ..) and focus on it for longer period of time, until you create long-term memory. Do not try to infuse all of the areas at once.

My second guess is that you learn inefficiently - everyone learns the best with different method:

• visual people just need to see it. These are the ones that will post an answer to watch all the tutorials (like @Noelle or @RitaGeraghty).




• some are hands-on, these people will advise not watching tutorials but doing exercises, more experimentation (like @David or @JakeD).




• some are verbal/aural, helps them to say things out loud. Also they like to read, so written-style tutorials, suggestions of using a book (@JakeD).

The best is to combine all, but also to play to your strengths. If you figure out your style, the process will be less painful and more efficient.

All the answers that only tell you to keep going and just tell you what to do have little to no use. They are opinions of the author, it might not help you at all. Pls figure this out for yourself, only you can.

@batFINGER understands this too, his answer is more straight to the point. Maybe you should take a different path in your life and focus on something else that will fulfill you better, that won't frustrate you even when you struggle. Or maybe you are just experiencing something more complicated for the first time in your life and you are just confused Blender takes more persistence. Then keep going. Only you can decide.

The thing is you shouldn't be watching too many tutorials. Watching tutorials makes you think you know how to do this and that. That's not always true, they can also make you lie to yourself. See you need to be thinking for yourself not just copying others. Also remember that quite many tutorials online are bad for you, theres always a danger that you pick up others bad habits. Be critical.

Tutorials should be used as a sort of a checking point. So in reality you should make a concentrated effort to do something before your about to watch a tutorial on it. This way you will be much much better equipped to understand why they did what they did.

So just do something, it will not quite be where you want to be. That's ok that is your level. Try doing something simple. Then try to figure out what your missing on. Find somebody that is really better, tell him what your aim is and ask him to give you some insight into what you should be doing.

Then consider that 2 weeks is nothing, you can not learn 3D graphics/ modelling in 2 weeks or even a month. You can only learn the basic concepts. There are a hundred things you haven't been thinking about yet. You need at minimum 6 months or a year to even begin to grasp the task at hand. Also you will not learn all of blender, its too complex for that, you can only learn a few aspects of it.

What are you trying to model? Perhaps you are trying to jump to something too hard such as a creature or a tree. Could you model a simple crate? Barrel? Wooden chair?

A barrel, e.g., could be as simple as a cylinder with a few edge loops that are scaled accordingly. If you want to get fancier, try adding some rings around it for braces (normally like 2-4). You could go further and extrude/scale on the ends to make it not perfectly flat.

I had the same issue many years ago when I went through this book (how I got started in Blender):

I did all of the modeling there, but felt like I couldn't build my own things. I think that in the end it comes down to persistence. I'd say I didn't truly get comfortable with modeling for several months (probably 3+) although that is a hard thing to know specifically. Try to learn the tools for what they actually are and what they do rather than the specific use case as in a tutorial. Don't spend your time memorizing hot keys. If you find yourself wasting time doing the same thing over and over again and trying to find it in the UI, then look up the hotkey (often just hover over it) and start using it.

The easiest things to model (at a basic level at least) are going to be things that are not very fluid/curved, so get started with objects that have simple geometry and work up from there.

Keep going! There was a long period of time for me where I felt like I was learning a lot but still couldn't functionally do anything on my own. After a long time of feeling like I wasn't getting much closer to being a functional blender user all of a sudden I was actually modeling stuff. When learning any complex program one needs to learn the way of thinking that's necessary to use the program well. You can know lots of individual things but until you start thinking about things in the right way all of the little bits of knowledge won't quite come together. Learning the way of thinking about blender just takes time interfacing with it. If you keep going you'll get to a point where things just start to make sense on a whole other level, you'll know how to think in blender and you'll be able to model things.

If you want to do CGI, then don't give up. People say Blender is hard to learn, and I won't dispute that, but what they tend to leave out is that most things worth doing are hard to learn. Piano takes a lot of practice to master. As does drawing. Photography. (Physical) sculpting.

Two weeks is hardly enough time to learn any art with any degree of depth or complexity. Give it a good while longer. While practice may not make perfect, it does make you better.

If you like modelling, don't quit - if you are motivated, keep practicing and you'll get better in time.

Start with realistic goals. Take a simple object from your surroundings, something with a clearly defined geometry, like a light bulb, a screw, a hammer, a bottle, a mug full of pencils... This may seem too easy, but in reality, it's not easy at all. Try to replicate the object faithfully - from the accurate overall shape to the every minute detail you can see. Use calipers to measure the object and make your model with accurate dimensions. Start low poly, but don't stop at that. Be very thorough, almost as if you're doing it in a CAD software. Then focus on the materials and the scene, make it as good as you can, keep your standards high. Don't rush it, if necessary, spend several weeks doing a simple object, until you're happy with it. You're not a professional at this, yet, so you don't have deadlines.

Modelling without a reference object, that is from your imagination, is really difficult and you shouldn't be doing it until you're completely comfortable modelling with a reference. The problem with modelling from imagination is that you think you know how a hammer looks like, but actually, you don't. At least not in sufficient detail to be able to reproduce it faithfully. That's the same problem with drawing: the most important skill you need to develop is the ability to accurately see an object. You develop this skill by modelling with a reference.

Trying to do things that are, at present, too difficult for you, will only have an effect of discouraging you.

That said, make sure you don't get stuck in a comfort zone, doing simple objects for years and years. Make sure your next project is always more challenging than the previous ones.

i know how you feel, it took me 3 years before i got "BETTER" at blender. and i am still not that good Just keep playing with stuff and watching tutorials. Here is a tutorial that might just help https://www.youtube.com/watch?v=LgZ8kiISrjE. My thought process runs like this a bit, walk around a store, (or any were) see something you like, and think how you might model it in blender, then go online and search for a tutorial on how to make that thing and if there are none look up reference images and and do your best and just keep trying.

Never give up on what you are doing. 3D modeling isn't as easy as it seems, two weeks is just a short period to test your skills, It tooks two year for a friend of mine to make his own good model. Start by making low Polly object and scenes. Don't go for hard and real looking models then build you skills step by step, also you need maybe a good hardware too.

It took me 4 months of endless tutorials, courses, and trial and error almost daily to FINALLY feel 75% comfortable modeling things on my own. After all of that, while it felt like forever, it was actually very fast. It felt like overnight I had absorbed a lot of things I had learned. The brain needs time to fully process new information. I often take week breaks and find that random things I didn't understand before just sort of make sense. Don't give up because it's immediately difficult. Push through and just know that even though it's hard and makes no sense in the moment, your brain is doing additional information absorbing without you actively trying. The number of times I've watched tutorials and 'learned' techniques that made NO sense, I can't count on my hands and feet combined. But when I approached another project, I magically found that something I had watched 1 month ago in a random tutorial now makes sense and applies to what I'm doing. Keep pushing past all the hard parts, and in time they will make sense. I'm a now 6 month Blender user, went from 0 to a decent amount of knowledge that I never thought I was capable of retaining. you can do it!

BTW My first month, almost nothing made sense. Not joking, I just kept doing things and following tutorials despite understanding 10% of what I was being told/shown. Literally, its consistency and just exposing yourself to as much as you can. That's the key in the very beginning. Watch EVERYTHING you can get your hands on. I recommend purchasing a beginners intro to Blender course on Udemy, which should cover all essentials and you will understand what a mesh is, the uses of hotkeys, and other fundamentals. A course on sale which is VERY OFTEN is $10. It's worth it.

Absolutely not, you certainly shouldn't quit. I've been using Blender since it first became free, and it was a lot more convoluted back then (on obviously worse hardware); it took me a decade to get really good at it. It might have taken only a few years, but in truth, I'd been exactly where you are about a dozen times. My early models were horrifying.

Shortcuts are helpful, but they aren't an end-game solution. I suggest you think of it all as a development process. It's like learning to sculpt or draw. Every time you finish a model, look over it, itemize what you don't like about it, and figure out how to do it right. Then, try again. You need to train your instincts, too, and that takes a while.

Also, forget these guys who insist that you can learn something as vast as 3D modeling overnight, they're trying to sell you something. Even now, every single day I learn something new about that software. There will always be more to learn, and more to do. If you think of Blender as less of an opponent, and more of an adventure, then this will be a lot easier.

I wish you luck in your continued endeavors!

I will suggest you not to give up on it so fast. I use use Maya for most of my work and I had to switch to Blender , so the only thing which I did was that, I put myself into a situation where I had to model a basic Inorganic Model in 3 days and yes I also saw a few of Blender Tutorials and those 3 days of modeling kind of made me learn those shortcuts and also that modeling a simple model Boosted my confidence . So yeah just hang on there and simply enjoy. Do it your self and you'll finally reach there.