Messed up intestine animation with lattice modifier
.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty{ margin-bottom:0;
}
up vote
13
down vote
favorite
I have modelled a digestive system. I have to animate the food movement inside the gastrointestinal tract. I have learned to do it with lattice modifier from another post. I have done it for the food pipe. When I tried to apply same for the intestines the animation is somewhat messed. I created intestine, made a bezier curve in the shape of intestine and created lattice to deform the intestine. When I made the lattice to follow the path of the curve the deformation occurs but the other parts of the intestine are also affected by the lattice which makes the animation so messed up. Please help me get a clear animation of material through the intestine...I have attached a gif of the animation which I got...
lattice
add a comment |
up vote
13
down vote
favorite
I have modelled a digestive system. I have to animate the food movement inside the gastrointestinal tract. I have learned to do it with lattice modifier from another post. I have done it for the food pipe. When I tried to apply same for the intestines the animation is somewhat messed. I created intestine, made a bezier curve in the shape of intestine and created lattice to deform the intestine. When I made the lattice to follow the path of the curve the deformation occurs but the other parts of the intestine are also affected by the lattice which makes the animation so messed up. Please help me get a clear animation of material through the intestine...I have attached a gif of the animation which I got...
lattice
add a comment |
up vote
13
down vote
favorite
up vote
13
down vote
favorite
I have modelled a digestive system. I have to animate the food movement inside the gastrointestinal tract. I have learned to do it with lattice modifier from another post. I have done it for the food pipe. When I tried to apply same for the intestines the animation is somewhat messed. I created intestine, made a bezier curve in the shape of intestine and created lattice to deform the intestine. When I made the lattice to follow the path of the curve the deformation occurs but the other parts of the intestine are also affected by the lattice which makes the animation so messed up. Please help me get a clear animation of material through the intestine...I have attached a gif of the animation which I got...
lattice
I have modelled a digestive system. I have to animate the food movement inside the gastrointestinal tract. I have learned to do it with lattice modifier from another post. I have done it for the food pipe. When I tried to apply same for the intestines the animation is somewhat messed. I created intestine, made a bezier curve in the shape of intestine and created lattice to deform the intestine. When I made the lattice to follow the path of the curve the deformation occurs but the other parts of the intestine are also affected by the lattice which makes the animation so messed up. Please help me get a clear animation of material through the intestine...I have attached a gif of the animation which I got...
lattice
lattice
asked Nov 22 at 13:28
Aravind S
905
905
add a comment |
add a comment |
2 Answers
2
active
oldest
votes
up vote
15
down vote
accepted
When using lattices, it's quite important to keep the outside undeformed where necessary. Ideally two rows of verts, not one. If you don't, the deformation will extend to infinity and beyond.
As you can see, the left lattice still deforms both cylinders.
The selected cylinder is almost but not completely untouched. Two rows are bullet proof though.
Hm, the end of that animation should yield interesting results.
2
Thank you so much sir!! It worked...;)
– Aravind S
Nov 22 at 13:51
One is glad to be of service
– Haunt_House
Nov 22 at 13:53
5
@AravindS On Stack Exchange, the way you say "this answer worked" is to click the green tick beside the answer (scroll up a little and you'll find it!).
– wizzwizz4
Nov 22 at 17:18
add a comment |
up vote
7
down vote
For the animation you're trying to do right now, maybe the Cast modifier would make it easier:
- Create an empty.
- Give your bowel a Cast modifier, with the empty as the Object. Put it above the Subdivision Surface modifier.
- Play with the different factors of the modifier so that it has the shape and influence you want.
- You can even create a second empty with a negative Factor if you want your bowel to contract (it doesn't seem like you need it this time though).
- Move your empty along the bowel (the easiest way is to make it follow a curve).
1
Wow....So Simple...Thank you sir!! I'll use this for small intestine....;)
– Aravind S
Nov 22 at 15:19
add a comment |
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
15
down vote
accepted
When using lattices, it's quite important to keep the outside undeformed where necessary. Ideally two rows of verts, not one. If you don't, the deformation will extend to infinity and beyond.
As you can see, the left lattice still deforms both cylinders.
The selected cylinder is almost but not completely untouched. Two rows are bullet proof though.
Hm, the end of that animation should yield interesting results.
2
Thank you so much sir!! It worked...;)
– Aravind S
Nov 22 at 13:51
One is glad to be of service
– Haunt_House
Nov 22 at 13:53
5
@AravindS On Stack Exchange, the way you say "this answer worked" is to click the green tick beside the answer (scroll up a little and you'll find it!).
– wizzwizz4
Nov 22 at 17:18
add a comment |
up vote
15
down vote
accepted
When using lattices, it's quite important to keep the outside undeformed where necessary. Ideally two rows of verts, not one. If you don't, the deformation will extend to infinity and beyond.
As you can see, the left lattice still deforms both cylinders.
The selected cylinder is almost but not completely untouched. Two rows are bullet proof though.
Hm, the end of that animation should yield interesting results.
2
Thank you so much sir!! It worked...;)
– Aravind S
Nov 22 at 13:51
One is glad to be of service
– Haunt_House
Nov 22 at 13:53
5
@AravindS On Stack Exchange, the way you say "this answer worked" is to click the green tick beside the answer (scroll up a little and you'll find it!).
– wizzwizz4
Nov 22 at 17:18
add a comment |
up vote
15
down vote
accepted
up vote
15
down vote
accepted
When using lattices, it's quite important to keep the outside undeformed where necessary. Ideally two rows of verts, not one. If you don't, the deformation will extend to infinity and beyond.
As you can see, the left lattice still deforms both cylinders.
The selected cylinder is almost but not completely untouched. Two rows are bullet proof though.
Hm, the end of that animation should yield interesting results.
When using lattices, it's quite important to keep the outside undeformed where necessary. Ideally two rows of verts, not one. If you don't, the deformation will extend to infinity and beyond.
As you can see, the left lattice still deforms both cylinders.
The selected cylinder is almost but not completely untouched. Two rows are bullet proof though.
Hm, the end of that animation should yield interesting results.
edited Nov 23 at 1:28
answered Nov 22 at 13:39
Haunt_House
11k12963
11k12963
2
Thank you so much sir!! It worked...;)
– Aravind S
Nov 22 at 13:51
One is glad to be of service
– Haunt_House
Nov 22 at 13:53
5
@AravindS On Stack Exchange, the way you say "this answer worked" is to click the green tick beside the answer (scroll up a little and you'll find it!).
– wizzwizz4
Nov 22 at 17:18
add a comment |
2
Thank you so much sir!! It worked...;)
– Aravind S
Nov 22 at 13:51
One is glad to be of service
– Haunt_House
Nov 22 at 13:53
5
@AravindS On Stack Exchange, the way you say "this answer worked" is to click the green tick beside the answer (scroll up a little and you'll find it!).
– wizzwizz4
Nov 22 at 17:18
2
2
Thank you so much sir!! It worked...;)
– Aravind S
Nov 22 at 13:51
Thank you so much sir!! It worked...;)
– Aravind S
Nov 22 at 13:51
One is glad to be of service
– Haunt_House
Nov 22 at 13:53
One is glad to be of service
– Haunt_House
Nov 22 at 13:53
5
5
@AravindS On Stack Exchange, the way you say "this answer worked" is to click the green tick beside the answer (scroll up a little and you'll find it!).
– wizzwizz4
Nov 22 at 17:18
@AravindS On Stack Exchange, the way you say "this answer worked" is to click the green tick beside the answer (scroll up a little and you'll find it!).
– wizzwizz4
Nov 22 at 17:18
add a comment |
up vote
7
down vote
For the animation you're trying to do right now, maybe the Cast modifier would make it easier:
- Create an empty.
- Give your bowel a Cast modifier, with the empty as the Object. Put it above the Subdivision Surface modifier.
- Play with the different factors of the modifier so that it has the shape and influence you want.
- You can even create a second empty with a negative Factor if you want your bowel to contract (it doesn't seem like you need it this time though).
- Move your empty along the bowel (the easiest way is to make it follow a curve).
1
Wow....So Simple...Thank you sir!! I'll use this for small intestine....;)
– Aravind S
Nov 22 at 15:19
add a comment |
up vote
7
down vote
For the animation you're trying to do right now, maybe the Cast modifier would make it easier:
- Create an empty.
- Give your bowel a Cast modifier, with the empty as the Object. Put it above the Subdivision Surface modifier.
- Play with the different factors of the modifier so that it has the shape and influence you want.
- You can even create a second empty with a negative Factor if you want your bowel to contract (it doesn't seem like you need it this time though).
- Move your empty along the bowel (the easiest way is to make it follow a curve).
1
Wow....So Simple...Thank you sir!! I'll use this for small intestine....;)
– Aravind S
Nov 22 at 15:19
add a comment |
up vote
7
down vote
up vote
7
down vote
For the animation you're trying to do right now, maybe the Cast modifier would make it easier:
- Create an empty.
- Give your bowel a Cast modifier, with the empty as the Object. Put it above the Subdivision Surface modifier.
- Play with the different factors of the modifier so that it has the shape and influence you want.
- You can even create a second empty with a negative Factor if you want your bowel to contract (it doesn't seem like you need it this time though).
- Move your empty along the bowel (the easiest way is to make it follow a curve).
For the animation you're trying to do right now, maybe the Cast modifier would make it easier:
- Create an empty.
- Give your bowel a Cast modifier, with the empty as the Object. Put it above the Subdivision Surface modifier.
- Play with the different factors of the modifier so that it has the shape and influence you want.
- You can even create a second empty with a negative Factor if you want your bowel to contract (it doesn't seem like you need it this time though).
- Move your empty along the bowel (the easiest way is to make it follow a curve).
edited Nov 22 at 20:37
answered Nov 22 at 14:42
moonboots
7,7372514
7,7372514
1
Wow....So Simple...Thank you sir!! I'll use this for small intestine....;)
– Aravind S
Nov 22 at 15:19
add a comment |
1
Wow....So Simple...Thank you sir!! I'll use this for small intestine....;)
– Aravind S
Nov 22 at 15:19
1
1
Wow....So Simple...Thank you sir!! I'll use this for small intestine....;)
– Aravind S
Nov 22 at 15:19
Wow....So Simple...Thank you sir!! I'll use this for small intestine....;)
– Aravind S
Nov 22 at 15:19
add a comment |
Thanks for contributing an answer to Blender Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fblender.stackexchange.com%2fquestions%2f123276%2fmessed-up-intestine-animation-with-lattice-modifier%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown